share to:
Strong adhesion, environmentally friendly quality, strong sealing, simple operation, insulation and electricity resistance, high and low temperature resistance
Cold and temperature resistant, no fear of temperature differences
Not affected by bad weather, able to withstand cold and high temperatures
High temperature resistance: 150°C
Low temperature resistance: -40°C
1. Glue glass glue 995 neutral silicone quick-drying aluminum veneer sealing universal strong nail-free beautiful seam structural glue
2. Neutral silicone structural adhesive
3.Features: Strong adhesion, environmentally friendly quality, strong sealing, simple operation, insulation and electricity resistance, high and low temperature resistance
Cold and temperature resistant, no fear of temperature differences
Not affected by bad weather, able to withstand cold and high temperatures
High temperature resistance: 150°C
Low temperature resistance: -40°C
4. Scope of use
It is suitable for the weather-resistant sealing construction of stone dry hanging, glass backing, etc. It can also be used for the joint sealing construction of aluminum, organic glass, metal, ceramic tiles, etc. It can also be used for wood, marble, concrete During the joint sealing construction of cement, rock, etc., and generally no primer is required.
5. Instructions for use
Please use this product in a well-ventilated environment: Please keep the product out of reach of children to avoid accidental ingestion: If the uncured colloid accidentally comes into contact with your eyes, wash them with plenty of water in time and seek medical advice.
Product description
This product is a one-component product with fast curing speed, good elasticity and strong adhesion; it is resistant to ozone, ultraviolet rays, weather resistance and long service life; it will not harden, powder or crack; it has good Adhesion, no primer is needed under normal conditions; it has good compatibility with silicone series structural adhesives, weather-resistant adhesives and neutral adhesives
Instructions for use
01 Cleaning
The construction surface must be clean, dry and free of dirt. If primer is required for compatibility testing, apply primer.
02 Protection
Apply protective tape on both sides of the joint and use appropriate padding material inside the seam.
03 Sizing
Cut the glue nozzle according to the required size, and the amount of glue applied should be enough to fully contact both sides of the joint.
04 Remove the tape
The trimming should be completed within 20 minutes after construction and the protective tape should be removed.
05 Ventilation
Good ventilation must be maintained during construction and curing.
